STEPS FOR ACTIVATING XFINITY ON YOUR DEVICES - xfinity.com/activate

 The Xfinity Stream app provides linear cable stations, broadcasting stations, cloud files and video on demand, all without needing to let an Xfinity TV Box. Future releases of this app will consist of added features and performance, as well as stability and optimization.

Now let us program the remote to your TV, this will permit you to power the TV on and off, command your TV's volume and then change between inputs on your TV. You will need your TV producers code. Listed below are a couple of of the most frequent TV codes, so you might have to test more than 1 manufacturer code to discover the best one, a whole list of codes can be seen in xfinity.com/activate
Next, press the Xfinity button and then launch. A 3 digit code will appear on your TV screen, by pressing on the buttons on your remote input the code, press OK. When the remote will be paired into a box, the distant is paired with a box, it may control that box to match this distant repeat the procedure, using a box.
As soon as you've discovered your code, then press and hold the setup button on your remote until the LED in the top varies from red to green, then launch. Type from the producers code, with the buttons on the remote. When the code has been entered correctly, the LED on peak of the distant must flash green.
You can now command your TV's power, inputs and volume together with your remote. Assessing your remote works the exact same manner, with the code of the manufacturer.  As soon as you've discovered your code, then press and hold the setup button on your remote until the LED in the top varies from red to green, then launch.
Type from the producers code, together with the numbered buttons on the remote. When the code has been entered correctly, the LED on peak of the distant must flash twice, this will make it possible for you to turn your device on or off and then control the volume of your receiver or audio pub.
Your Xfinity distant for your X1 entertainment functioning system may be programmed to control your set-top box, TV and sound device, like an AV receiver or audio pub. To begin with, let us set your remote this permits you to set your box and tip your anywhere that is distant to command it.
Pairing your remote is simple, just follow these basic steps. Manually flip on the TV, make sure your TV is set to the input to your box. Press and hold the setup button until the LED on peak of the changes from red to green.
Once programmed, your remote will only control the volume of your receiver or audio bar rather than the quantity of your TV.